Try Compact Automation's Online Component Configurator today! (click here)

Auburn Gear introduced two new models in its' Power Wheel planetary drive family: Model 145 and Model 200.

The Model 145 is rated at 145,000 lb-in (16, 400 N-m) of intermittent output torque. This drive fits in the same dimensional area as a Model 9 drive, but provides an increase in torque capability and radial load capacity as compared to the Model 9.

The Model 200 is rated at 200,000 lb-in (22,600 N-m) of intermittent output torque. This drive is dimensionally interchangeable with a Model 10, but also has increased torque and radial load capacity.

Check out Auburn Gear's Compact 25 Wheel Drive as well!

For more information on Auburn Gear's Power Wheel Planetary Gear Drives, or any other Auburn Gear products, or to place an order, please call HPS at 540-977-0700.

Download data sheets below.

Auburn Gear announced the introduction of their new Model 70CD line of compact drives. This model is designed to accept several different cartridge-style (plug-in) hydraulic motors and is available in a broad range of ratios as well as a fully integrated park brake. It is the optimal solution for mobile off-highway wheel or track drive equipment where design space for the final drive is limited, and yet, high levels of tractive power and load-carrying capacity are required.

For more information on the Model 70CD, or any other Auburn Gear products, or to place an order, please call HPS at 540-977-0700.

Dowload data sheet below. 

Another new drive from Auburn Gear is the Model 3 Power Wheel drive, which is rated 15,000 lb-in (1,700 N-m) of intermittent output torque. The model 3 provides a unique solution for many small auger, spreader and low profile tire applications.

For more information on the Model 3, or any other Auburn Gear products, or to place an order, please call HPS at 540-977-0700 and ask to speak to a sales representative.

Download flyer below.

Auburn Gear introduced a new line of PTO Pump Drive that are driven by 540 rpm or 1000 rpm PTO shafts and serve as a speed increaser to drive a hydraulic pump.

For more information on the PTO Planetary Pump Drive or any other Auburn Gear products, or to place an order, please call HPS at 540-977-0700 and ask to speak to a sales representative.

Dowload datasheet below.

We are pleased to announce that Hydraulic & Pneumatic Systems, Inc. is now the authorized distributor for Gast products in Virginia.

Gast is a leader in the design and manufacturing of high quality air motors, vacuum generators, compressores and vacuum pumps.

Please contact your HPS  representative to assist you in your air product needs.

Hydraulic and Pneumatic Systems, Inc. is pleased to announce that we are now the authorized distributor for Jun-air compressors in Virginia.

Jun-air compressors are designed for a countless number of uses and can be found in laboratories, and dental clinics, along with medical and industrial applications. If you are looking for clean and quiet air, Jun-air and HPS can provide a complete compressed air solution.

Please contact your HPS representative to assist you in your compressor needs.

ROSS L-O-X® valves are energy isolation valves and are generally used as the first valve in a line supplying compressed air to equipment.

Air can be shut off by pushing the L-O-X® handle inward; downstream air is simultaneously exhausted through the L-O-X® exhaust port. Many standards & regulations, e.g., OSHA, require that the valve be padlocked in this position to prevent handle from being pulled out inadvertently during maintenance and/or servicing.

For more information on ROSS L-O-X Valves or other ROSS products, please contact us at 540-977-0700 and ask to speak to a sales representative.

HydraForce is pleased to announce the release of two products which can greatly reduce manifold costs while improving overall machine performance.

The MPCV08-20 and SVCV08-20 and 21  are both multi-function cartridges which can decrease the number of cavities required in a manifold.

The MPCV08-20 is a manual pull valve with both a double blocking and a reverse flow check position ideal for use in manual lowering applications.

The SVCV08-20 and 21 are solenoid valves with an outlet flow check for use in low-leakage, load holding applications.

For more information on HydraForce products, please contact us at 540-977-0700 and ask to speak to a sales representative.

NOSHOK offers a variety of cost-effective orifices and snubbers to protect valuable instrumentation from pulsation and pressure spikes by restricting the flow of rapidly increasing and decreasing pressures.

NOSHOK press-fit brass orifices or threaded 316 stainless steel orifices are available on all NOSHOK pressure gauges and most NOSHOK transducers. They are standard with a .012" I.D or .032" I.D, depending on the model. These orifices dont take up space, as they are inserted inside the NPT. They are an economical solution for managing pressure fluctuations in dynamic applications.

NOSHOK also offers piston type and sintered snubbers. Our piston type snubbers resist clogging and are self cleaning. They are supplied with five different sized pistons to ensure the correct amount of snubbing for virtually every application. They are available in brass and 316 stainless steel in 1/4" NPT, 1/2" NPT or 7/16-20 SAE-4.

NOSHOK sintered snubbers increase gauge readability by smoothing out pressure surges, pulsations and spikes, and eliminate instrument failure due to pressure shock. Snubbing action is achieved by utilizing a corrosion resistant 316 stainless steel sintered disc, which is held in place by way of a 316 stainless steel set screw.  Unlike the competitors crimped method, NOSHOK sintered snubbers allow easy cleaning or replacement of the sintered disc by simply removing the set screw, replacing the disc and then re-inserting the set screw, eliminating the need to replace the entire unit if a new disc is required. This type of built-in versatility greatly increases the snubbers longevity, durability and dependability.

Five basic discs are available for each sintered snubber to accommodate specific application needs. Exotic materials or intermediate disc grades are also available on a per order basis. These snubbers provide long service life with no moving parts to wear out.

For more information on NOSHOK products, please contact us at 540-977-0700 and ask to speak to a sales representative.